5 Meter Duplex Multi-Mode OM2 Fiber Cable | UPC LC-LC Fiber Cable | Fiber Patch Cord
Multi-Mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron. Multi-Mode Om2 Cables should only be used with Multi-Mode SFP’s and equipment and will not work on single mode sfp’s.
Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.
Specifications:
- Speed as per installed SFP or SFP+ e.g 1.25 Gbps or QSFP or QSFP+ 10 Gbit/s or 40 Gbit/s+
- Diameter : 3mm
- 0.45mm steel strength member
- Duplex (Dual MultiMode and Dual LC Connectors)
- LC/UPC LC/UPC
- G.657A2, 2.0×3.0mmmm
- LSZH (Low Smoke, Zero Halogen)
Tensile Strength
Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.
G.657A2 Bend Ratio vs Other Specifications
| Fibre Type | Bending Radii | Attenuation Increase (db) |
| G652D | 100 turns on 25mm mandrel at 1310/1550nm | ≤ 0.03 |
| G652D | 100 turns on 30mm mandrel at 1625nm | ≤ 0.1 |
| G657A2 | 10 turns on 15mm mandrel at 1550nm | ≤ 0.05 |
| G657A2 | 10 turns on 15mm mandrel at 1625nm | ≤ 0.1 |
| G657A2 | 1 turn on 10mm mandrel at 1550nm | ≤ 0.1 |
| G657A2 | 1 turn on 10mm mandrel at 1625nm | ≤ 0.2 |
| G657A2 | 1 turn on 7.5mm mandrel at 1550nm | ≤ 0.5 |
| G657A2 | 1 turn on 7.5mm mandrel at 1625nm | ≤ 1.0 |
These Fiber Cables Are Commonly used with the Fiber SFP’s below
Reviews
There are no reviews yet.