305 Meter CAT6E STP (Shielded) 23 AWG Gigabit Network Cable Roll

305 Meter CAT6E STP (Shielded) 23 AWG Gigabit Network Cable Roll

This cable has been tested up to 80 Meter on 1Gbps Network switches to ensure Gigabit speeds after installation or added to a network. Longer lengths will sync to 100Mbps depending on network switches quality but average 1Gbps speeds sync distances will be ±80 Meter lengths.

Since the cable is shielded it is ideal to install in industrial areas with high EMI interference and can run parallel near electrical cables.

CAT6 STP (Shielded with Braiding / Ripcord for grounding cable) are used for high bandwidth networks / up to 1Gbit/s (are backwards compatible to slower networks) and for use with any of our HDMI Extender over CAT5 / CAT6 / CAT7 products. Besides the foil shield, the twisting of the pairs and number of turns per inch causes RF shielding and protects from crosstalk.

Cat 6 cable is rated for transmission frequencies of up to 550 MHz. For HDMI Extenders to use a higher color depth, higher bandwidth cables are required such as this cable to ensure best video/audio transmission, minimal signal attenuation and longer distances possible.

Specifications :

• STP Cable (Shielded Twisted Pair)
• Rated to 550 MHz Frequencies / 1 Gbps / 1000 Mbps
• 4 Pairs of 23 AWG Conductors
• Meets or exceeds all CAT6 standards
• Superior signal to noise ratio
• Excellent Attenuation and Crosstalk Characteristics
• Ultra smooth jacket that makes this cable easy to pull in tight spaces.
• Twisted pairs are brightly colored and distinguishable at a glance
• Whites are striped to match corresponding color pairs
• Comes standard with ripcord to assist in stripping PVC jacket
• Length incrementally marked per meter on the cable so you always know how much is left
• Color: Grey

Cables are >23AWG=0.57-0.59mm and will pass long lengths on 1Gbps networking, POE CCTV Cameras and access points and is used for high speed networks. Do not be fooled by cheaper 24AWG=0.51mm CAT5 or CAT6 cables for using long runs of cable. Each conductor on this cable is 0.59mm±5% for less signal loss than 24AWG and suitable for 1Gbps Networking, POE, CCTV or any other telephony applications.