Procet EN30G

This Power over Ethernet Adapter is a IEEE802.3AT Gigabit PoE injector, which fully conforms to the standard of 802.3, transmitting power through Ethernet / Network CAT6 / CAT7 cable, the maximum transmission distances can reach 100 meters. The PoE injector has two Ethernet gigabit data ports and an output port combination of data and power. In addition, the device can be used for Ethernet devices which is IEEE802.3af compatible and any other PoE power applications for devices ranging 48v-52Volt such as wireless Access Points, VoIP phone and webcams.

Features:

• PoE ports supports IEEE802.3at and IEEE802.3af standard
• Equipped with gigabit port, blazing-fast transfer rate, maximum transfer rate of up to 30W for single port power distance extension of up to 100 meters for standard cat. 5e and cat. 6 Ethernet cable
• Plug and play, no any configuration required

Specifications:

Network standards

• IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3af, IEEE802.3at

LED Indicator

• PWR, PoE

Interfaces

• 1*10/100/1000 Base-T Ethernet Port(Data/PoE)
• 1*10/100/1000 Base-T Ethernet Port(Data)

Transmission media

• Recommended: CAT5/5e UTP, CAT6, CAT7 or better

Dimensions

• 132.3mm*60mm*33mm

Level of protection

• ESD: Air discharge: ±10kV, Contact discharge: ±8kV

Forwarding mode

• Store-and-forward

Transmission Rate

• 1000Mbps

PoE budget

• Single port: AF: 15.4W, AT: 30W
• Whole device: 30W

Power consumption

• 30W

Input voltage

• 100-240V AC 50/60Hz
• 52V/0.8A DC Power Adapter Output

Mounting

• Desktop mounting: support

This POE is commonly used with the Wifi Access Points below:

Ubiquiti Unifi Wifi 6 POE Wireless Access Point | Dual Band UniFi 6 Lite with POE Injector Included

This adapter is designed to power any RouterBOARD, CCTV Camera, Wifi Access point or any other POE Device over Gigabit Ethernet. Simply connect your power source and then use an Ethernet cable to connect the injector to the POE device. The POE Injector reduces the number of wires and only requires 1 x CAT6 Ethernet Cable to Power a POE Capable device and transmit data to it. Power over pins 4 and 5 is used to power and communicate with 10/100 Mbps devices.

The DC Power Input to the POE Injector is Distributed to the RJ45 Network Pins below:

PoE Injector and PoE Splitter Cable Functions and Applications Video

What is POE and How it works Instructional Video

Sample Diagram for Installation

Common Power Supplies below which is used with the POE Injector depending on voltage required for your equipment the correct one needs to be chosen.

52 Volt, 2A POE Injector Power Supply | Power Over Ethernet

12 Volt 5A Switched Mode Power Adapter for CCTV Power Supply / POE Injector Power Supply

Specifications:

– PoE: Passive PoE (non 802.3af)
– Input Voltage: 12-56V DC
– Output Voltage : any
– Power: 4,5 Cable Pins – 12-52V; 7,8 Pins -Return
– Max. Current: 2A
– Ethernet Cable Length: Up to 60m (Estimated on CAT6 CCA, Full Copper will do longer lengths)
– Ethernet Speed: 10/100 Mbps