Description

• SFP Media Converter with 8*1000M SFP optical port + 2 adaptive Gigabit Ethernet ports which can be connected to 10Mbps, 100Mbps or 1000Mbps Ethernet Switches
• Automatically adapt to full-duplex or half-duplex mode, can achieve up to 2000 Mbps per port bidirectional transmission rate, 8 Gigabit SFP transceiver module ports to achieve long-distance fiber optic network transmission.
• MAC address self-learning function, to ensure data error-free transmission. Store and forward exchange mode, to prevent the spread of damaged packets in the network.
• Flow control function, can prevent a large number of instantaneous data on the impact of the network, support Auto-MDI / MDIX automatic flip function.
• High-capacity, high-bandwidth, all ports across the switch without blocking data throughput, support for long frame transmission; for Internet cafes, hotels, intelligent community, small and medium enterprises, high-definition network, video  surveillance and and security provides a low cost, reliable solution.

Features

1. Comply to IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, 802.3X, 802.3z
2. Fluid Control: Full-duplex: IEEE 802.3x or Half-duplex
3. Auto MDI/MDIX
4. Store-and-forward
5. Rj45 is self-adaption 10/100/1000M port
6. Support MAC address automatic study function
7. Can work with ANY SFP Type : single bidi fiber SFP / double fiber / single mode / multimode SFP

SFP Modules used with this Media Converter

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

550m Multi Mode SFP Module | Dual LC Interface | Gigabit SFP miniGBIC | Cisco, Huawei, Dell Compatible

RJ45 SFP Gigabit Ethernet Transceiver Module | 1000TX mini GBIC | Dell, Cisco, Huawei Compatible

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

Technical parameters 

A Network media converter is a device designed to interconnect different networking media such as fiber and Copper Network cables to facilitate communication between them.

Gigabit Ethernet Media Converters was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before – only now it can support both copper and fiber mediums.

Enhances the Distance between Networking Devices
Connecting the converter to fiber segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fiber-based node or networking device.

Common SFP’s used with this Media Converter

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

550m Multi Mode SFP Module | Dual LC Interface | Gigabit SFP miniGBIC | Cisco, Huawei, Dell Compatible

Cabling Flexibility & Specifications
Network managers can install fiber cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several converters can be simultaneously installed into a 19″ rack-mountable chassis.

• Data transfer rate: 1000 Mbps
• One 1000Base-T RJ45 port, maximum distance 100 m / 300 ft. (Cat5e and better)
• RJ45 port with Auto MDI/MDI-X support and auto-negotiation
• One 1000Base-FX SFP Port
• Fiber distance support: Dependant on SFP Installed

CAT6 Network Cabling used with this Product:

100 Meter CAT6 Roll | Pure Copper Gigabit STP Ethernet Network Cable

100 Meter Cable Roll | CAT6 UTP CCA Unshielded 23AWG Gigabit Network Cable

100 Meter Roll CAT6 STP CCA Gigabit Ethernet Network Cable