This adapter is used mostly in DSTV Xtraview Installations for splitting the heartbeat cable to additional decoders. Coax adapters are the perfect way to quickly change the gender or connector type on an already terminated cable.

Use this connector to avoid bending cables and connecting cables e.g from roof straight into the 90 degree connector for Explora or other Multichoice / DSTV Decoders

• Ideal for converting an RF cable to a screw type F male plug.Ideal for joining a female F type cable and converting it to an RF Female Plug.
• F type MALE plug
• RF FEMALE Plug
• All metal Design
• Small and compact

Coax adapters are the perfect way to quickly change the gender or connector type on an already terminated cable. This adapter has an F-Type female to an F-Type  female T connector.

Features:

• Brass body
• Nickel plated
• Straight

The F connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for “over the air” terrestrial television, cable television and universally for satellite television and cable modems.

This F-type compression connector is intended for use with RG6 Quad-shielded cable. It features a solid aluminum body and plastic compression seal.

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant, hence water proof versions are needed for outside use (for example, on aerials).

The male connector body is typically crimped, or sometimes screwed, onto the exposed outer braid.

Note!! Connectors are sold separately (Single connector only)

How to fit Coax F-Type Connectors Instructional Video and Usage

Compression F-Type Crimping Tool used for 31.4mm Connectors

Compression F-Type Crimping Tool used for 29.3mm Connectors

To crimp these connector onto RG6U or RG59 Cable use the F-type Compression Tool below:

Compression F Type Crimping Tool – for Professional RG6U / RG59 Installation

The connector is usually used with RG6U cable listed below

100 Meter Roll RG6u Coax RF Cable – LNB Cable 75 Ohm, 64 Braid

Barrel Connectors are used to join RG6 Coaxial / RF Cables together with F-Type connectors at the end of each cable.

Threaded “F” barrel (female-female) to join cables or to fit to a wall plate. Use it with threaded male “F” connectors.

Type : Nickel Plated

The F connector is a common means of connecting television signals. It is a type of coaxial RF connector commonly used for “over the air” terrestrial television, cable television and universally for satellite television and cable modems.

How to fit Coax F-Type Connectors Instructional Video and Usage

Used this connector with RG59 or RG6U cable as below

100 Meter Roll RG6u Coax RF Cable – LNB Cable 75 Ohm, 64 Braid

Price per Meter | RG59 Coax Cable | SDI & CCTV Cable

The F connector is inexpensive, yet has good 75 Ω impedance match up to 1 GHz and has usable bandwidth up to several GHz. One reason for its low cost is that it uses the solid conductor (center wire) of the specified types of coaxial cable as the pin of the male connector. This design is subject to the surface properties of the inner conductor (which must be solid wire) and is not corrosion resistant, hence water proof versions are needed for outside use (for example, on aerials).

The male connector body is typically crimped, or sometimes screwed, onto the exposed outer braid.