You can connect any HDMI devices / players such as HD camera, DSTV Explora, DSTV Ultra, Gaming Consoles, Blu-ray etc to a HDMI display by using Cat 5e/6 cable for long distances instead of expensive HDMI cable, you can also use your existing Infrared remote control to control the devices from a remote location.

The Transmitter unit used with this Receiver unit can be purchased separately as below

HDBitT HDMI over Network LAN IP Switches Extender with IR | Transmitter v5.0

You can use unlimited receivers with the transmitter unit to connect a source / player to unlimited displays through network switches or routers. IR Eyes to control equipment from remote location using current equipment IR remote control is included. A Gigabit (1Gbps) Network switch needs to be used with this product since 10/100 Network Switches may have insufficient bandwidth depending on resolution used on this product higher resolutions may not work on 10/100Mbps switches.

Connection Diagram

Cable that can be used with the extenders:

Price per Meter | Shielded CAT6E STP 23 AWG Gigabit Networking Cable

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

HDMI Extenders are a convenient and easy way to extend your HDMI video signal over long distances. This Extender set also supports USB Keyboard / Mouse inputs to control a PC or Laptop in a Far end or Secure Room via a remote location. It Features a HDMI Passthrough Port on the Transmitter side to ensure the signal is split to nearby display and to far end display.

Specifications:

• Signal transmission : Full Copper or HCCA CAT6 recommended for maximum transmission distance. Using CAT5/CAT5e Cables or CCA Cables will work but transmission distances may vary.
• Support input/output resolutions: 480i/p,576p,720p,1080i/p;
• Support point-to-point mode Transmitter –> CAT6 Cable –> Receiver
• Plug and play, no need for additional software;
• Supports Wired USB Keyboard and Mouse. Wireless Units may work but not tested due to additional power usage of Mouse/Keyboard USB Dongles
• Audio Sample rate : 32kHz,44.1kHz,48kHz
• ESD Protection Human Body Model : ± 8kV (air-gap discharge), ± 4kV (contact discharge)
• Operating Temperature : 0˚C ~ 40˚C / 32˚F ~ 104˚F

Transmitter & Receiver Inputs and Outputs

Sample Installation Diagram 1:1 Transmitter to Receiver used for reference only : Supports 1080p Max output resolutions

Features:

• Support HDMI 1.3/HDCP1.1&1.2
• Support point-to-point mode, one point-to-many mode and cascade connection mode.
• 802.3 Ethernet standard.
• The design of pure hardware, plug and play, no need for additional software.
• Support long distance control with a keyboard and mouse to a PC in a Secure or Remote Room

Specifications:

Package contents:

• 1x  Transmitter
• 1x  Receiver
• 2x  5V/1A Power Supply.
• 1x User’s Manual

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 40-60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper or HCCA Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

This HDMI extender uses one single CAT6 cable instead of HDMI cable, you can extend a 4K/1080p Video signal up to 100 Meters. The purpose of the extender is to achieve long-distance signal transmission with low- cost wires. It also supports 3.5mm Audio Transmission and Infrared Remote Control back to Source / Player. The Transmitter unit has a Loop-Out HDMI Port and functions as a HDMI Splitter.

Features

• Compliant with HDMI 2.0, HDCP 2.2 and DVI 1.0;
• Signal transmission : Cat6 cable up to 100 meters instead of HDMI cables are connected between TX and RX

Supported Formats

• Support video format up to 4k2k@30Hz, FullHD 1080p@60Hz and other resolutions lower at 60hz, with 24bit RGB/YcbCR
• 4:4:4/YCBCR4:4:4,and up to 4k2k@30Hz with 12bit YCBCR 4:4:4;
• Support 3D frame sequential video format up to 1080p@60;
• Audio format support via HDMI :  DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD;
• Bidirectional Infrared Supported for a large amount of frequencies

Specifications

• Length of CAT-6 cable between Transmitter and Receiver  : Up to 100 meters for 4k 30hz Transmission distances on Full Copper CAT6 STP.
• HDMI Input/Output : 4Kx2K@30Hz / 1080p / 1080i / 720p / 576p / 576i / 480p / 480i
• Support audio formats : DTS-HD / Dolby-trueHD / LPCM7.1 / DTS / Dolby-AC3/DSD
• Max bandwidth-: 600MHz
• Max baud rate : 18Gbps
• Input Video signal : 0.5~1.5Volts p-p
• Output DDC signal : -5Volts p-p (TT1L)
• Input/Output HDMI cable distance : ≤15meter AWG26 HDMI Copper Cable or Any Length HDMI Fiber Optic Cable
• Max working current : 800mA
• Power adapter format : Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A
• Operating Temperature range : (-15 to +55℃)
• Operating Humidity range : 5 to 90%RH (No Condensation)

Due to high bandwidth when using 4k UltraHD Full Copper CAT6 Network Cabling is recommended. For 720p or FullHD CCA Cable can be used but Full Copper advised.

100 Meter CAT6 Roll | Pure Copper Gigabit STP Ethernet Network Cable

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

How to Install HDMI Extender over CAT6 Video and Instructions

This HDMI Extender over Single Cat5e/6 extends high definition video and audio signals, at a distance of up to 30m for Full HD (1080p) over a single Cat5e/6A HCCA cable.

Transmission distances will vary based on quality of network cable used e.g CCA vs Full Copper CAT6 or CAT5e vs CAT6.

Features

• Support video input : 1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6A HCCA(recommended) cables up to 30 meters instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 1080p/1080i/720p/576p/576i/480p/480i
• No loss of quality
• Installs in minutes

Installing the HDMI Extender Over CAT5e/CAT6A HCCA:

• Switch off All Equipment during Connections
• Plug the transmitter into the HDMI input source such as a DSTV Explora, PS4 etc.
• Connect a CAT6A HCCA cable to both the output of the transmitter and input of the receiver.
• Plug the HDMI receiver into the HDMI display such as: TV, Projector etc.
• Power on All Equipment

Sample Installation Diagram

Contents

1x HDMI Over CAT5e/6 Transmitter
1x HDMI Over CAT5e/6 Receiver

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6A HCCA Cable is recommended as below

Price per Meter | HCCA Shielded CAT6A Cable | STP Gigabit Networking Cable

Fiber Cables to be used with HDMI over Fiber extenders is at LC to LC Fiber Cables

Note!! This Fiber Extender Set can use any Fiber or copper SFP. It has a BiDi (Bi-Directional) Single Mode Simplex SFP set included as at 3km Single Mode Bi-Directional SFP Transceiver Module SET for transmission distances up to 3km. If longer ranges required the SFP set needs to be replaced by one that allows longer transmission distances. Multimode SFP’s can also be used on this HDBitT Fiber Extender.

Technical Specifications:

Tools to be used with fiber Optic Cabling Installation

12-in-1 Professional Fiber Optic Tool Kit incl Precision Fiber Cleaver, Fiber Strippers, Fiber Tester

Fiber Cable Stripping Tool for 125 micron fiber for FTTP or FTTH Applications

Fiber Optic Cable Stripping Tool | Strip 125 micron fiber optical cables

You can connect any HDMI devices / players such as HD camera, DSTV Explora, DSTV Ultra Decoder, Gaming Consoles, Blu-ray etc to a HDMI display by using Cat 5e/6 cable for long distances instead of expensive HDMI cable, you can also use your existing Infrared remote control to control the devices from a remote location.

The Receiver units used with this Transmitter unit can be purchased separately as below

HDBitT HDMI over Network LAN IP Switches Extender with IR | Receiver

You can use unlimited receivers with the transmitter unit to connect a source / player to unlimited displays through network switches or routers. IR Eyes to control equipment from remote location using current equipment IR remote control is included. A Gigabit (1Gbps) Network switch needs to be used with this product since 10/100 Network Switches may have insufficient bandwidth depending on resolution used on this product higher resolutions may not work on 10/100Mbps switches.

These HDMI over Network / IP Extenders has been tested with the Network over Powerline adapters as at Tenda 200Mbit/s Network over Powerline and Tenda 1Gbit/s Network over Powerline adapters.Using the HDMI over Network products in this type of setup together with the Network over Powerline adapters will effectively create an HDMI over Powerline solution. One Player / PC / Source can transmit via the Network over Powerline adapters to multiple displays / HDTV’s instead of using traditional network switches and installing CAT6 Networking cable to enable these extenders to function across existing 220v electrical power cables. This type of solution has been tested up to 70 meter over existing home / business power cables. Longer distances is possible but will be dependant on your home power cables quality and wiring at the DB Board. If a UPS is used in between transmitter and receiver this solution will not work as the signal can only pass through electrical DB Board and breakers and not via a UPS.

Features

• 120m/394ft HDMI Extender over IP with IR pass-through
• HDMI signal extender over single CAT5/5e/6 cable
• Extend and split by LAN (delivery by Router/switch)
• Compatible with existing network, will not affect Internet Bandwidth or usage
• Plug and play without any manual setting.

Connection Diagram

IP and MAC address setting

These units are plug-and-play and does not need any IP Address Configurations.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below for networking cables depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at Best Practices Installation Guidelines & Troubleshooting

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD’s, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

You can connect any HDMI devices / players such as HD camera, DSTV Explora, DSTV Ultra, Gaming Consoles, Blu-ray etc to a HDMI display by using Cat 5e/6 cable for long distances instead of expensive HDMI cable, you can also use your existing Infrared remote control to control the devices from a remote location.

The Transmitter unit used with this Receiver unit can be purchased separately as below

HDBitT HDMI over Network LAN IP Switches Extender with IR | Transmitter

You can use unlimited receivers with the transmitter unit to connect a source / player to unlimited displays through network switches or routers. IR Eyes to control equipment from remote location using current equipment IR remote control is included. A Gigabit (1Gbps) Network switch needs to be used with this product since 10/100 Network Switches may have insufficient bandwidth depending on resolution used on this product higher resolutions may not work on 10/100Mbps switches.

These HDMI over Network / IP Extenders has been tested with the Network over Powerline adapters as at Tenda 200Mbit/s Network over Powerline and Tenda 1Gbit/s Network over Powerline adapters. Using the HDMI over Network products in this type of setup together with the Network over Powerline adapters will effectively create an HDMI over Powerline solution. One Player / PC / Source can transmit via the Network over Powerline adapters to multiple displays / HDTV’s instead of using traditional network switches and installing CAT6 Networking cable to enable these extenders to function across existing 220v electrical power cables. This type of solution has been tested up to 70 meter over existing home / business power cables. Longer distances is possible but will be dependant on your home power cables quality and wiring at the DB Board. If a UPS is used in between transmitter and receiver this solution will not work as the signal can only pass through electrical DB Board and breakers and not via a UPS.

Features

• 120m/394ft HDMI Extender over IP with IR pass-through
• HDMI signal extender over single CAT5/5e/6 cable
• Extend and split by LAN (delivery by Router/switch)
• Compatible with existing network, will not affect Internet Bandwidth or usage
• Plug and play without any manual setting.

Connection Diagram

IP and MAC address setting

These units are plug-and-play and does not need any IP Address Configurations.

Please ensure cables are terminated according to 568A or 568B standard as in diagram below for networking cables depending on CAT5e / CAT6 STP cable type and properly grounded via the ripcord wire inside STP cables. Grounding the cable will also ensure better protection against voltage spikes. STP cables shields better against nearby EMI.

Most HDMI Sources / Players / Gaming Consoles use an encryption algorithm called HDCP which can cause signal issues. To troubleshoot audio / video issues (HDMI Handshake problems) regarding HDMI distribution see the problems and solutions guide at Best Practices Installation Guidelines & Troubleshooting

Use high quality Surge Protection plugs on your equipment to ensure unstable power from electrical wall socket / electrical surges will have less chance of damaging your equipment. a UPS (Uninterruptible power supply) is highly recommended in all areas of your home or business where LCD’s, players and HDMI Equipment is installed.

No HDMI / CAT-5e / CAT-6 / CAT-7 cables are included with this product and must be purchased separately.

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

This POC Powered HDMI Extender over Single Cat5e/6 extends high definition video and audio signals, at a distance of up to 40m (1080p) / 70m (720p) over a single Cat5e/6 cable.

Features:

• Highest quality transmission : Using uncompressed Technology for Lossless Video & Audio transmission.
• Supports 1080P and 3D signals, distance up to 40m over CAT6 for 1080p, 70 Meter for 720p
• Needs power only on transmitter side (Power Supply included). Receiver side powered by transmitter side power over ethernet cable.
• Supported Resolutions : 1080p / 1920 x 1080 FullHD, 720p 1280×720 or HD Ready
• Refresh Rate Support : 60Hz
• Built-in automatic adjustment system which makes the image smooth, clear and stable
• Built-in ESD protection system
• Simple to install, plug and play;

Installation

1. Connect an HDMI cable between the HDMI input port of transmitter and the HDMI output port of the video source,
2. Connect the HDMI output port of receiver to the display device with HDMI cable,
3. Connect the transmitter UTP port to the receiver UTP port using a single CAT6 cable (Shielded CAT6 recommended as per best practices installation guidelines).
4. Connect the provided DC 5V Power Supplies to the power socket of the transmitter

How to Install HDMI Extender over CAT6 Video and Instructions

Specifications:

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

This HDMI KVM Over IP Extender is based on the TCP/IP standard used in ethernet networking. It transmits max 120 meters on a point-to-point installation (1 Transmitter to 1 Receiver) from your HDMI or DVI-D source to HD display with Keyboard/Mouse by single CAT5e/6 cable. It can also transmit you HDMI/Keyboard/Mouse source by one point-to-many mode over network switches or point-to-point over networks for unlimited distances. Over a ethernet, wireless or fiber network the set can transmit unlimited distances depending on the network speed required and a minimum of 100 Mbps.

Sample Installation Diagram (KVM Extender pics on Gallery Images)

If you want to run these HDMI KVM IP extenders over Fiber please uplink the transmitter and receiver together with Fiber SFP’s with the Media Converters below:

Gigabit Fiber Media Converter | 1Gbps RJ45 Ethernet to 1000Base-FX SFP | Fiber to Ethernet

These HDMI KVM over IP / Network Extenders has been tested with the Network over Powerline adapters as at Tenda 200Mbit/s Network over Powerline and Tenda 1Gbit/s Network over Powerline adapters. Using this HDMI KVM Extender over IP product in this type of setup together with the Network over Powerline adapters will effectively create an HDMI over Powerline solution. It will not require network switches and CAT6 Networking cable to enable these extenders to function, it will use existing 220v electrical power cables as the transport medium between the KVM Transmitter and Receiver when used together with Network over Powerline products. This type of solution has been tested up to 70 meter over existing home / business power cables. Longer distances is possible but will be dependent on your home power cables quality and wiring at the DB Board. If a UPS is used in between transmitter and receiver this solution will not work as the signal can only pass through electrical DB Board and breakers and not via a UPS.

Features:

• Support point-to-point mode, one point-to-many mode over ethernet network switches and cascade connection mode.
• 802.3 Ethernet standard.
• The design of pure hardware, plug and play, no need for additional software.
• Support long distance control with a keyboard and mouse to a PC in a Secure or Remote Room

Specifications:

Package contents:

• 1x  Transmitter
• 1x  Receiver
• 2x  5V/2A Power Supply.
• 1x User’s Manual

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 40-60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below or connect the set via network switches

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

Features:

This extender has one HDMI input and a local HDMI output on the Transmitter unit side to allow the source / player to split to 2 displays, one nearest via direct HDMI Cable to display and the other via CAT5e / CAT6 to far end display.

• Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6 STP(recommended) cables up to 60 metres instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Support CEC
• Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
• No loss of quality
• Installs in minutes
• Need DC5V/2A power supply included with Package

How to Install HDMI Extender over CAT6 Video and Instructions

Specifications

Length of CAT-6 cable between Rx and TX……………………………….Up to 60 metres
HDMI Input…..……………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input……………………………………………………………………LPCM
2 x HDMI Output…….……………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output………..…………………LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth……………………………………………………………………2255MHz
Max baud rate……………….…….………….………….………………………6.75Gbps
Input Video signal ………….…………………..…………………….… 0.5~1.5Volts p-p
Output DDC signal …………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance………≤20m AWG26 HDMI 1.3 standard cable
Max working current……….………………………………………………………1000mA
Power adapter format……..…Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range……..……….………….…………………… (-15 to +55C)
Operating Humidity range…………………………….5 to 90%RH (No Condensation)
Dimension (L x W x H) ………………………………..…………………82x45x21 (mm)
Weight…..………………………………………………………………………………220g