HDMI Extenders are a convenient and easy way to extend your HDMI video signal over long distances. This Extender set also supports USB Keyboard / Mouse inputs to control a PC or Laptop in a Far end or Secure Room via a remote location. It Features a HDMI Passthrough Port on the Transmitter side to ensure the signal is split to nearby display and to far end display.

Specifications:

• Signal transmission : Full Copper CAT6(recommended) cables up to 50 meters instead of HDMI cables are connected between TX and RX Units.
• Support input/output resolutions: 480i/p,576p,720p,1080i/p;
• Support point-to-point mode Transmitter –> CAT6 –> Receiver
• Plug and play, no need for additional software;
• Supports Wired USB Keyboard and Mouse. Wireless Units may work but not tested due to additional power usage of Mouse/Keyboard USB Dongles
• Audio : Sample rate:32kHz,44.1kHz,48kHz
• ESD Protection Human Body Model : ± 8kV (air-gap discharge), ± 4kV (contact discharge)
• Operating Temperature : 0˚C ~ 40˚C / 32˚F ~ 104˚F

Transmitter & Receiver Inputs and Outputs

Sample Installation Diagram 1:1 Transmitter to Receiver used for reference only : Supports 1080p Max output resolutions

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 40-60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

This HDMI Extender over Single Cat5e/6 extends high definition video and audio signals, at a distance of up to 30m for Full HD (1080p) over a single Cat5e/6A HCCA cable.

Transmission distances will vary based on quality of network cable used e.g CCA vs Full Copper CAT6 or CAT5e vs CAT6.

Features

• Support video input : 1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6A HCCA(recommended) cables up to 30 meters instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 1080p/1080i/720p/576p/576i/480p/480i
• No loss of quality
• Installs in minutes

Installing the HDMI Extender Over CAT5e/CAT6A HCCA:

• Switch off All Equipment during Connections
• Plug the transmitter into the HDMI input source such as a DSTV Explora, PS4 etc.
• Connect a CAT6A HCCA cable to both the output of the transmitter and input of the receiver.
• Plug the HDMI receiver into the HDMI display such as: TV, Projector etc.
• Power on All Equipment

Sample Installation Diagram

Contents

1x HDMI Over CAT5e/6 Transmitter
1x HDMI Over CAT5e/6 Receiver

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6A HCCA Cable is recommended as below

Price per Meter | HCCA Shielded CAT6A Cable | STP Gigabit Networking Cable

Fiber Cables to be used with HDMI over Fiber extenders is at LC to LC Fiber Cables

Note!! This Fiber Extender Set can use any Fiber or copper SFP. It has a BiDi (Bi-Directional) Single Mode Simplex SFP set included as at 3km Single Mode Bi-Directional SFP Transceiver Module SET for transmission distances up to 3km. If longer ranges required the SFP set needs to be replaced by one that allows longer transmission distances. Multimode SFP’s can also be used on this HDBitT Fiber Extender.

Technical Specifications:

Tools to be used with fiber Optic Cabling Installation

12-in-1 Professional Fiber Optic Tool Kit incl Precision Fiber Cleaver, Fiber Strippers, Fiber Tester

Fiber Cable Stripping Tool for 125 micron fiber for FTTP or FTTH Applications

Fiber Optic Cable Stripping Tool | Strip 125 micron fiber optical cables

This HDMI KVM Over IP Extender is based on the TCP/IP standard used in ethernet networking. It transmits max 120 meters on a point-to-point installation (1 Transmitter to 1 Receiver) from your HDMI or DVI-D source to HD display with Keyboard/Mouse by single CAT5e/6 cable. It can also transmit you HDMI/Keyboard/Mouse source by one point-to-many mode over network switches or point-to-point over networks for unlimited distances. Over a ethernet, wireless or fiber network the set can transmit unlimited distances depending on the network speed required and a minimum of 100 Mbps.

Sample Installation Diagram (KVM Extender pics on Gallery Images)

If you want to run these HDMI KVM IP extenders over Fiber please uplink the transmitter and receiver together with Fiber SFP’s with the Media Converters below:

Gigabit Fiber Media Converter | 1Gbps RJ45 Ethernet to 1000Base-FX SFP | Fiber to Ethernet

These HDMI KVM over IP / Network Extenders has been tested with the Network over Powerline adapters as at Tenda 200Mbit/s Network over Powerline and Tenda 1Gbit/s Network over Powerline adapters. Using this HDMI KVM Extender over IP product in this type of setup together with the Network over Powerline adapters will effectively create an HDMI over Powerline solution. It will not require network switches and CAT6 Networking cable to enable these extenders to function, it will use existing 220v electrical power cables as the transport medium between the KVM Transmitter and Receiver when used together with Network over Powerline products. This type of solution has been tested up to 70 meter over existing home / business power cables. Longer distances is possible but will be dependent on your home power cables quality and wiring at the DB Board. If a UPS is used in between transmitter and receiver this solution will not work as the signal can only pass through electrical DB Board and breakers and not via a UPS.

Features:

• Support point-to-point mode, one point-to-many mode over ethernet network switches and cascade connection mode.
• 802.3 Ethernet standard.
• The design of pure hardware, plug and play, no need for additional software.
• Support long distance control with a keyboard and mouse to a PC in a Secure or Remote Room

Specifications:

Package contents:

• 1x  Transmitter
• 1x  Receiver
• 2x  5V/2A Power Supply.
• 1x User’s Manual

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 40-60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below or connect the set via network switches

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

Features:

This extender has one HDMI input and a local HDMI output on the Transmitter unit side to allow the source / player to split to 2 displays, one nearest via direct HDMI Cable to display and the other via CAT5e / CAT6 to far end display.

• Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6 STP(recommended) cables up to 60 metres instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Support CEC
• Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
• No loss of quality
• Installs in minutes
• Need DC5V/2A power supply included with Package

How to Install HDMI Extender over CAT6 Video and Instructions

Specifications

Length of CAT-6 cable between Rx and TX……………………………….Up to 60 metres
HDMI Input…..……………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input……………………………………………………………………LPCM
2 x HDMI Output…….……………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output………..…………………LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth……………………………………………………………………2255MHz
Max baud rate……………….…….………….………….………………………6.75Gbps
Input Video signal ………….…………………..…………………….… 0.5~1.5Volts p-p
Output DDC signal …………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance………≤20m AWG26 HDMI 1.3 standard cable
Max working current……….………………………………………………………1000mA
Power adapter format……..…Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range……..……….………….…………………… (-15 to +55C)
Operating Humidity range…………………………….5 to 90%RH (No Condensation)
Dimension (L x W x H) ………………………………..…………………82x45x21 (mm)
Weight…..………………………………………………………………………………220g

This unit includes a Transmitter and Receiver unit and the required power supply.

How to Install HDMI Extender over CAT6 Video and Instructions

Features:

• Support HDMI 1.3 protocol
• Support full 3D
• HDCP 1.2 protocol compliant
• Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6 STP(recommended) cables up to 60 metres instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Support CEC
• Audio format support : LPCM
• No loss of quality
• Installs in minutes Includes DC5V/2A power supply

Specifications:

Length of CAT-6 cable between Rx and TX….Up to 60 meters
HDMI Input….24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input.…LPCM
HDMI Output….24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output.…LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth.…2255MHz
Max baud rate.…6.75Gbps
Input Video signal .… 0.5~1.5Volts p-p
Output DDC signal .… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance….≤20m AWG26 HDMI 1.3 standard cable
Max working current….1000mA
Power adapter format.…Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/2A
Operating Temperature range.… (-15 to +55℃)
Operating Humidity range….5 to 90%RH (No Condensation)
Dimension (L x W x H) .…82x45x21 (mm)
Weight.…220g

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

Features:

• Supports video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Signal transmission :Single CAT-5e STP or CAT-6 STP(recommended) cables up to 60 metres instead of HDMI cables are connected between TX and RX Extender.
• Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
• Support CEC
• Audio format support : DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
• No loss of quality
• Installs in minutes
• Can connect USB Cables included for power to any nearby USB port such as HDTV, Gaming Console, Wall Charger or any other USB Device. Product comes with 2 x Micro USB to USB type A cables.

How to Install HDMI Extender over CAT6 Video and Instructions

Specifications:

Length of CAT-6 cable between Rx and TX………….……………..Up to 60 metres
HDMI Input…..…………………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format input..………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
HDMI Output…..…………….…24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio format output……..…………………LPCM7.1/DTS/Dolby-AC3/DSD
Max bandwidth………………………..………………………………………2255MHz
Max baud rate……………….………….….………….………………………6.75Gbps
Input Video signal ………….………………..…………………….… 0.5~1.5Volts p-p
Output DDC signal ………………………………………………… 5Volts p-p (TT1L)
Input/Output HDMI1.3 cable distance…..≤20m AWG26 HDMI 1.3 standard cable
Max working current……………………………………………………………1000mA
Power cable format…….Micro USB to USB type A cables 5v 1amp
Operating Temperature range…..….………………………………… (-15 to +55℃)
Operating Humidity range……….…….….……….5 to 90%RH (No Condensation)
Dimension (L x W x H) …………………….…………………………82x45x21 (mm)
Weight…..…………………………………………..………………………………220g

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable

These HDMI over LAN / IP Units can use your existing network infrastructure in a building whether it is wired networking or wireless. > 100Mb/s networks is needed for wired distribution and wirelessWifi5 or Wifi6 networks with low latency is recommended when using wireless networking to distribute your HDMI signal.

A Gigabit (1Gbps) Network switch needs to be used with this product since 10/100 Network Switches may have insufficient bandwidth depending on resolution used on this product higher resolutions may not work on 10/100Mbps switches.

This unit uses a near lossless HDBiTT Compression technology between transmitter and receiver

Please note that these receiver units need to be used in conjunction with the HDMI over LAN transmitter below

120 Meter HDMI over IP | HDMI over Network LAN v4.0 | Transmitter

Resolutions Supported

Application

You only need one transmitter per source / player and can connect up to 263 receivers to your network switches and the transmitter will broadcast signal to all connected receivers. If the switches are managed it is recommended to setup different VLAN’s to separate HDMI over IP traffic from other IP traffic on the network. The TX unit will broadcast on network to the receivers. To limit the broadcasting to a specific set of ports on a switch or cascaded switches you need to configure a VLAN for Video & Audio which includes the Transmitter HDMI over LAN unit and all receiver units. A VLAN is not mandatory but recommended when limiting broadcasting traffic to specific ports or wired networks only. If a dedicated switch is installed for the video / audio then VLAN’s are not needed.

The transmission distances via network switches is theoretically unlimited since each network switch or access point / router will reroute traffic to the next switch and signal will not be affected on longer distances or more network hops.

These HDMI over Network / IP Extenders has been tested with the Network over Powerline adapters as at Tenda 200Mbit/s Network over Powerline and Tenda 1Gbit/s Network over Powerline adapters. Using the HDMI over Network products in this type of setup together with the Network over Powerline adapters will effectively create an HDMI over Powerline solution. One Player / PC / Source can transmit via the Network over Powerline adapters to multiple displays / HDTV’s instead of using traditional network switches and installing CAT6 Networking cable to enable these extenders to function across existing 220v electrical power cables. This type of solution has been tested up to 70 meter over existing home / business power cables. Longer distances is possible but will be dependant on your home power cables quality and wiring at the DB Board. If a UPS is used in between transmitter and receiver this solution will not work as the signal can only pass through electrical DB Board and breakers and not via a UPS.

IP and MAC address setting

The Transmitter and receiver System module has a built-in HTTP server which can be accessed by any browser for firmware updates.

You will need to configure your DHCP Server / Router to assign IP addresses to the units. When most internet routers are installed they are already configured to hand out IP addresses to new devices on the network. This is automatically assigned based on your network config. Easiest to check which IP has been assigned to the HDMI over LAN TX or RX is your router log file for IP assignments or under the DHCP Server / Config area a list of hosts and IP’s assigned. IP address can then be fixed on your DHCP server by assigning the MAC address of the HDMI over LAN TX or RX to a specific IP required.

Example of Router log

“:\”192.168.1.210\”,\”host\”:\”,\”vendor\”:\”dhcp-11\”,\”moui\”:\”*\”,\”serial\”:\”*\”,\”pclass\”:\”*\”,\”cid\”:\”01:6a:76:d2:dd:62:04\”,\”ifname\”:\”br0\”}

Browser Interface on Transmitter Example:

When connecting the transmitter and receiver use the CAT5e Shielded Twisted Pair Cables at or CAT6 STP Cables. CAT5e FTP / STP depending on quality of cable (Full Copper cables) can be installed for resolutions up to 1080p depending on color depth, refresh rates & equipment signal quality, but only recommended up to 720p/1080i. For 1080p transmissions full copper CAT6e FTP / STP or CAT7 SSTP are required when connecting the transmitter and receiver directly to each other without networking switches.

Cheaper CAT6 CCA Ethernet Network Cable as below can be used with this extender but only to about 60% of the max distance indicated on extender. For Full Distance installations and best transmission CAT6 Full Copper Cable is recommended as below

Price per Meter | CAT6 Unshielded Twisted Pair (UTP) CCA Gigabit Network Cable

CAT6 Full Copper Ethernet Network Cable Recommended for max distances

Price per Meter | CAT 6 STP Pure Copper Gigabit Ethernet Cable