Specifications:

• Power output Limit :  30 Watt, Max 3Amp on below 12v selections
• Input: AC 100V-240V 50/60HZ Plug type:
• Selectable DC Voltages : 3 /4.5 / 6 / 7.5 / 9 / 12V
• DC Adapter Sizes: 6.3X3.0MM,5.5X2.5MM,5.0X3.0MM,4.0X1.7MM,3.5X1.5MM,3.5X1.35MM

NOTE!! You need to set the appropriate voltage before you add this power adapter to your equipment to ensure you do not exceed the voltage indicated for the equipment and damage it.

Appliances below that can be powered by this power supply but not limited to below : 

• Wireless Access Points
• External Hard drives enclosures / Solid State Drives
• SLX Splitters / RF Splitters
• HDMI Splitters / Switches / Extenders
• USB Hubs
• CCTV Cameras
• Cameras
• Mobile phones
• Routers : Mobile & Fiber
• Tablets
• Chargers for Toys
• Blood pressure meters
• DVD Players
• Camcorder DVR
• Radios
• Chargers for Tools / Hardware
• Charger for 2-Way Radio’s

Some items on our website this product can be used with:

4 Way Powered Active RF Splitter / Compact Aerial Splitter with RF Amplifier and DC Power Pass

2 Way Powered / Active Compact Aerial Splitter with RF Amplifier Active RF Splitter

1×2 HDMI Splitter – 4K x 2K Ultra HD (uHD) – 2 Ports Output

4G LTE Router | 300Mbps 2.4Ghz Wifi Access Point | 2x Fast Ethernet Ports | Tenda 4G480v2

PoE Ceiling Mount Wifi AP | MikroTik cAP Lite 2.4GHz 1.5dBi Access Point

Please check diameter on DC input on device and compare with adapter specs below. 12 Volt is normally used on Internet Routers, Access Points, External Solid State or Hard Drive Enclosures

SPECIAL FEATURES

• Universal AC input
• Low output ripple
• Short circuit protection
• High efficiency
• Built-in EMI filter
• Over load protection

INPUT

• Input range : 85 ~ 264 VAC
• Input frequency : 47 ~ 63 Hz
• Inrush current : 15A at 115VAC; 30A at 230VAC; cold start at 25
• Input current : 1.5A Max
• Leakage current : 0.5 mA at 50/60 Hz 264VAC input

OUTPUT

• Rated output power : 24 Watts
• DC Connector : 5.5mm OD & 2.1mm ID (Check DC Input size same on device but most 12 Volt devices uses this diameter on DC Power connector)
• Output voltage : 12V± 4%
• Output current : 2A
• Output load efficiency 80% at 100VAC full load; 80% at 264VAC full load
• Max power : 24 Watts for convection
• Adjustment range fixed
• Hold-up time 30 ms at full load and 230 VAC nominal line
• OL protection 96% to 104% above peak rating
• Ripple & noise 200mV at rated load
• Short current 100mA at 250 VAC rated load

ISOLATION

• Input to output AC3.0 KV/1 min.
• SAFETY APPROVAL
• UL CCC CE

ENVIRONMENTAL

• Operating temp : 0 to 50 ambient derate each output at 4.0% per degree from 50 to 60
• Storage temp. – 40 to 85
• Operating humidity 5% to 95% (non-condensing)
• MTBF 100,000 hours at full load and 25 ambient conditions (demonstrated)