Use this adapter on a UPC LC (Blue Connector) Fiber Cable to Convert the one side of a Single Mode Single Cable to a SC APC Connector (Green)

Specifications:

• Low insertion loss
• High precision of mechanical dimensions
• Fiber Type Supported : Single Mode Fiber
• High reliability & stability
• Simplex / Duplex (If 2 Adapters used)
• Repeatability ≤0.10dB
• Interchangeability ≤0.20dB
• Tested wavelengths : 1310nm, 1550nm

Some LC UPC Cables below used with this adapter to convert it to SC APC on one side (or both sides if 2 adapters used)

100M Simplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

1M Simplex Single Mode LC UPC Fiber Optic Cable | Fiber Patch Cord

30M Simplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

60M Duplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

150M Simplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor Usage
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Simplex (Single Fiber Cable and LC Connector Single Head on each side)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

3km Single Mode Bi-Directional SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX BiDi SFP

The POE Network Switches and Gigabit Network Switches below are installed with this cable and Fiber SFP’s

26 Port Rack Mountable Gigabit Network Switch | 2 SFP Ports for Transceiver Modules | OEM

18 Port Rack Mountable Gigabit Switch | 2 SFP Ports for Transceiver Modules | OEM

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Simplex (Single Fiber Cable and LC Connector Single Head on each side)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

3km Single Mode Bi-Directional SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX BiDi SFP

The POE Network Switches and Gigabit Network Switches below are installed with this cable and Fiber SFP’s

26 Port Rack Mountable Gigabit Network Switch | 2 SFP Ports for Transceiver Modules | OEM

18 Port Rack Mountable Gigabit Switch | 2 SFP Ports for Transceiver Modules | OEM

6 Port Gigabit POE Network Switch with SFP Port & RJ45 Uplink Port

400 Watt Rack Mountable 28 Port Gigabit POE+ Network Switch with 2 SFP Transceiver Module Ports | OEM

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Simplex (Single Fiber Cable and LC Connector Single Head on each side)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

3km Single Mode Bi-Directional SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX BiDi SFP

The POE Network Switches and Gigabit Network Switches below are installed with this SFP

26 Port Rack Mountable Gigabit Network Switch | 2 SFP Ports for Transceiver Modules | OEM

18 Port Rack Mountable Gigabit Switch | 2 SFP Ports for Transceiver Modules | OEM

400 Watt Rack Mountable 28 Port Gigabit POE+ Network Switch with 2 SFP Transceiver Module Ports | OEM

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Use this coupler to join LC to LC Duplex (or Simplex) Fiber Optic Cables to extend to cable length

Common Fiber Cables used with this product:

100M Duplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

150M Simplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

30M Duplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

60M Simplex Single Mode UPC LC-LC Fiber Optic Cable | Fiber Patch Cord | Outdoor Drop Cable

Quickly change your tactical fiber cables between LC or SC Connectors with these clever adapter cables.

Fiber Cables Commonly used with these adapters to have one end converted to LC UPC Connector

100 Meter Simplex SC to SC Fiber Cable / Single Mode 3mm, Fiber Drop Cable G.657.A1 Spec 9/125um

30 Meter Simplex Fiber Cable SC to SC | Single Mode 3mm | Fiber Drop Cable 9/125um

20 Meter Simplex SC to SC Fiber Cable | Single Mode 3mm | Fiber Drop Cable 9/125um

40 Meter Simplex SC to SC Fiber Optic Cable / Single Mode 3mm, Fiber Drop Cable G.657.A1 Spec 9/125um

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Simplex (Single Fiber Cable and LC Connector Single Head on each side)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

3km Single Mode Bi-Directional SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX BiDi SFP

The POE Network Switches and Gigabit Network Switches below are installed with this SFP

26 Port Rack Mountable Gigabit Network Switch | 2 SFP Ports for Transceiver Modules | OEM

6 Port Gigabit POE Network Switch with SFP Port & RJ45 Uplink Port

400 Watt Rack Mountable 28 Port Gigabit POE+ Network Switch with 2 SFP Transceiver Module Ports | OEM

18 Port Rack Mountable Gigabit Switch | 2 SFP Ports for Transceiver Modules | OEM

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• Cable is marked with “A” & “B”

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

Add link to Bidi SFP and Other SFP’s For Simplex Cable

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Product Description

This is a multi-purpose fiber toolkit, it provides the tools necessary for the assembly of fiber drop cable used together with fast assembly SC/ST/LC connectors.

• 1mW Visual Fault Locator Fiber Optic Cable Tester Meter for CATV. Power Supply: Uses 2 x AA 1.5V batteries (not included)
• The FC-6S fiber optic cleaver is used for single fiber cleaving. This FC-6S optical fiber cleaver is available with a single fiber adapter for 250 to 900 micron coated single fibers. It is a simple operation for the user to remove or install a single fiber adapter and alternate between mass and single fiber cleaving.
• Fiber Optic Cable Optical Power Meter -70~+8 dBm FC/SC Tester

Fiber Toolkit un-boxing and summary of Tools Video

Fiber Optical Power Meter Specifications:

• Wavelength(nm): 800~1700nm
• Measurement Range (dBm): -70dBm~+10dBm
• Uncertainty: ±0.2(5%)
• Calibrated Wavelength(nm): 850,980,1300,1310,1490,1550
• Resolution(dB): Linear indication: 0.1% Logarithmic indication: 0.01dBm
• Optical Connector: FC/SC Universal 2.5mm adaptor
• Power Supply: Uses 2 x AA 1.5V batteries
• Battery Operating Time: 240 h with 1.5V Battery(3)
• Operating Temperature: -10 ~ +60C
• Storage Temperature: -25 ~ +70C
• Relative Humidity: 0 to 95% (non-condensing)
• Dimension(mm): 190 x 100 x 48mm

Package includes:

1 x PWA001 Fiber Optical Power Meter
1 x 5Mw Visual Fault Locator – Up to 5KM testing
1 x SC adapter
1 x Fiber cleaver with Bag
1 x Fiber Optic Stripper CFS-2
1 x Fiber Optic Stripping Tool Plier
1 x Fixed-length Fiber optic wire stripping
1 x 250ML Hard Alcohol Bottle Container for cleaning of fiber cables
1 x 250x190x170mm Tool Bag
2 x Hexagonal Socket Wrench

This Toolkit is commonly used with the Single Mode Fiber Cable below

Per Meter | Single Mode, Single Core (Simplex) Fiber Optic Cable 3mm, 9/125um