Multi-Mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron. Multi-Mode Om2 Cables should only be used with Multi-Mode SFP’s and equipment and will not work on single mode sfp’s.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Speed as per installed SFP or SFP+ e.g 1.25 Gbps or QSFP or QSFP+ 10 Gbit/s or 40 Gbit/s+
• Diameter  : 3mm
• 0.45mm steel strength member
• Duplex (Dual MultiMode and Dual LC Connectors)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Single mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• Simplex (Single Fiber Cable and Connector Single Head on each side)
• LC UPC –  SC APC
• G.657A2, 2.0×3.0mm

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

Single Mode Fiber Cable Usage and Instructional Video

Single mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Diameter  : 1.7mm
• Duplex (Dual Fiber Cables and DUAL Connectors on each side of cable)
• LC/UPC SC/APC
• G.657A2, 2 x 1.7mm

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

Single Mode Fiber Cable Usage and Instructional Video

Single mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor Cabling Bow-Type Drop Cable
• Diameter  : 1.7mm
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×1.7mm

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

10Gbps Fiber SFP+ Module | Single Mode Dual LC Transceiver | 10km | Cisco, Huawei or Generic Switch Compatible

Single Mode Fiber Cable Usage and Instructional Video

Single mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor Cabling Bow-Type Drop Cable
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

10Gbps Fiber SFP+ Module | Single Mode Dual LC Transceiver | 10km | Cisco, Huawei or Generic Switch Compatible

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Simplex (Single Fiber Cable and LC Connector Single Head on each side)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

3km Single Mode Bi-Directional SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX BiDi SFP

The POE Network Switches and Gigabit Network Switches below are installed with this cable and Fiber SFP’s

26 Port Rack Mountable Gigabit Network Switch | 2 SFP Ports for Transceiver Modules | OEM

18 Port Rack Mountable Gigabit Switch | 2 SFP Ports for Transceiver Modules | OEM

6 Port Gigabit POE Network Switch with SFP Port & RJ45 Uplink Port

400 Watt Rack Mountable 28 Port Gigabit POE+ Network Switch with 2 SFP Transceiver Module Ports | OEM

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Multi-Mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron. Multi-Mode Om2 Cables should only be used with Multi-Mode SFP’s and equipment and will not work on single mode sfp’s.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Speed as per installed SFP or SFP+ e.g 1.25 Gbps or QSFP or QSFP+ 10 Gbit/s or 40 Gbit/s+
• Diameter  : 3mm
• 0.45mm steel strength member
• Duplex (Dual MultiMode and Dual LC Connectors)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

550m Multi Mode SFP Module | Dual LC Interface | Gigabit SFP miniGBIC | Cisco, Huawei, Dell Compatible

LC Fiber Connectors Explained in Detail

Single Mode Fiber Cable Usage and Instructional Video

Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Specifications:

• Indoor Cabling Bow-Type Drop Cable
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mmmm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

Single Mode Fiber Cable Usage and Instructional Video

Single mode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

Please see our guide at Fiber Optic Cables & SFP Compatibility for more information.

Specifications:

• Indoor or Outdoor Installation
• Diameter  : 3mm
• 2*0.45mm steel strength member
• Duplex (Dual Fiber Cables and DUAL LC Connectors on each side of cable)
• LC/UPC LC/UPC
• G.657A2, 2.0×3.0mm
• LSZH (Low Smoke, Zero Halogen)
• UV resistant

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode Dual LC 1.25Gbit 1310nm Gigabit SFP Transceiver Module | Cisco, Huawei, Dell Compatible

LC Fiber Connectors Explained in Detail

https://www.youtube.com/watch?v=SJwbqnjo4BE

Single Mode Fiber Cable Usage and Instructional Video

https://www.youtube.com/watch?v=7D5DXND3-TI