Singlemode fiber optic patch cables come with a 9 micron diameter glass core. With the cladding layer, they are 125 micron, and with the buffer layer they are 250 micron. To prevent excessive loss (attenuation), you should ensure that you only connect single mode cables to other single mode fibers already in your system.

This Fiber Cable exceeds OS2 100Gbps Rated Requirements which has a requirement of <0.40 dB/km signal loss at 1310nm and <0.30 dB/km signal loss at 1550nm. Please see technical product specifications for signal attenuation and compliance on pdf at 4 Core Fiber Optic Cable with Kevlar Strength Members

Specifications:

• Indoor/Outdoor Cable
• Diameter : 3mm
• 2*0.45mm steel strength member
• 4 Fiber Cores
• G.657A2
• LSZH (Low Smoke, Zero Halogen)
• UV resistant
• Max Speed : 100Gbps OS2 Rated

Tensile Strength

Always take care when installing fiber cables to ensure not to break the fiber inside the cable by over-bending or twisting cables. These cables strengthened by the 2*0.45mm steel wires provide more than enough pulling strength to easily install these cables in difficult environments without breaking the cable.

G.657A2 Bend Ratio vs Other Specifications

These Fiber Cables Are Commonly used with the Fiber SFP’s below

20km Single Mode BiDi SFP Transceiver Module SET | Cisco Huawei Dell Compatible | 1000BaseBX Bi-Directional

The Connectors below can be used with this Fiber Cable

LC UPC Fiber Optic Fast Connector | Field Terminated Connector

Fiber Optic SC Connector – Field Installation for 125 Micron Fiber Optic FFTH (Fiber-to-the-home)