RG59 Cable are mostly used in CCTV Systems, Terrestrial television, VHF/UHF receive applications and also to produce Coaxial Digital Audio cables which requires 75 Ohm.

RG59 cable can also be used to produce a Serial digital interface (SDI) cable. Using this RG59 cable together with the adapter below to make a Serial digital interface SDI cable

Male BNC Crimp Connector

Features:

• Solid polythene insulated 1/0.6mm copper clad steel conductor, braid screened.
• PVC Black sheathed overall.

Specifications:

• Nominal outside diameter : 6.15mm.
• Inner diameter : 1/0.64mm
• Capacitance : 68pF/m.
• Nominal attenuation (10m) : 1.3dB at 100MHz
• 1.9dB at 200MHz
• 4.6dB at 1000MHz.
• Maximum RF working voltage : 3.5kV peak.

RG-59 flexible coaxial cable is 75 ohm cable and often used for VHF/UHF receive applications, television and cable applications.

Product Specification:

• Inner conductor 0.81mm Copper Clad Steel (CCS)
• Insulation 3.7mm Foam PE
• Shielding 14mm Aluminium foil
• Braiding 64 / 0.14mm Copper Clad Aluminium (CCA)
• Outer sheath 6.0mm PVC (RoHS) – Black or White
• 2-conductor part: Conductor 2*14 / 0.18mm Bare Copper (BC)
• Jacket 2.8mm PVC (red & black)

Product features:

• Conductor resistance
• Coaxial part 20℃ conductor DC resistance <69.8Ω / KM
• 2-conductor part 20℃ conductor DC resistance <25.6Ω / KM
• Insulation 20℃ insulation resistance >500M Ω / KM
• Rated temperature – 70℃
• Rated voltage – 30V
• Capacitance – 67.0 +/- 3p F/M
• Velocity ratio – 66.6 +/- 3%
• Characteristic Impedance 20℃, 200MHz 75Ω +/- 3Ω
• Attention (20℃ -dB/100M, +/-10%) 100MHz 3.61
• 400MHz 23.80
• 1000MHz 39.30

RG-59 flexible coaxial cable is 75 ohm cable and often used for VHF/UHF receive applications, television and cable applications.

RG59 cable can also be used to make up an Serial digital interface (SDI) cable. Using this RG59 cable together with the adapter below to make a Serial digital interface SDI cable

Male BNC Crimp Connector

Features:

• Solid polythene insulated 1/0.6mm copper clad steel conductor, braid screened.

• PVC Black sheathed overall.

Specifications:

• Nominal outside diameter : 6.15mm.
• Inner diameter : 1/0.64mm
• Capacitance : 68pF/m.
• Nominal attenuation (10m) : 1.3dB at 100MHz
• 1.9dB at 200MHz
• 4.6dB at 1000MHz.
• Maximum RF working voltage : 3.5kV peak.

RG6/U Tri-shield is the minimum requirement under the latest Australian Standard for digital TV antenna cabling and for all TV antennas cabling for apartments / units (MATV). It is also used for the distribution of Cable TV (CATV) and Satellite TV (SATV) in residential or commercial premises. It features a copper-clad-steel inner conductor. Single-shield, dual-shield and tri-shield versions of RG6/U are available but do not provide adequate EMI shielding.

RG6/U type cables have lower attenuation characteristics than RG59 cable and therefore are suitable for transmission applications of about 200 to 300 meter (depending on source signal strength).

Various cable end connector types are used with RG6U cables including F-Type connectors as below

Twist-On F Type / F Connector (Use with RG6U Coax cables)

Barrel F Connector / F Type Compression Connector

RG6/U Tri-shield is the minimum requirement under the latest Australian Standard for digital TV antenna cabling and for all TV antennas cabling for apartments / units (MATV). It is also used for the distribution of Cable TV (CATV) and Satellite TV (SATV) in residential or commercial premises. It features a copper-clad-steel inner conductor. Single-shield, dual-shield and tri-shield versions of RG6/U are available but do not provide adequate EMI shielding.

RG6/U type cables have lower attenuation characteristics than RG59 cable and therefore are suitable for transmission applications of about 200 to 300 meter (depending on source signal strength).

Various cable end connector types are used with RG6U cables including F-Type connectors as below

Twist-On F Type / F Connector (Use with RG6U Coax cables)

Barrel F Connector / F Type Compression Connector